---
title: Classic Witch’s Broom
description: "![witch broom straw retainer turk's head braid](https://i0.wp.com/www.broomsquires.com/wp-content/uploads/2026/09/turks-head-blog-separator-Gemini_Generated_Image_42rwk242rwk242rw.png?w=1290&quality=80&ssl=1) ## **The Besom (The Classic \"Witch’s Broom\"): Construction & Assembly Guide** Unlike the [Shaker](https://en.wikipedia.org/w/index.php?title=Shakers&oldid=1374078367)-style flat broom, which relies on a specialized vise and linear stitching rows to create a flat sweeping profile, the…"
url: "https://www.broomsquires.com/docs/classic-witchs-broom/"
updated: "2026-09-28"
category: "The Patron's Library (Customer Support) / Acquisitions (Ordering & Custom Brooms)"
---

# Classic Witch’s Broom

![witch broom straw retainer turk's head braid](https://i0.wp.com/www.broomsquires.com/wp-content/uploads/2026/09/turks-head-blog-separator-Gemini_Generated_Image_42rwk242rwk242rw.png?w=1290&quality=80&ssl=1)

## **The Besom (The Classic "Witch’s Broom"): Construction & Assembly Guide**
Unlike the [Shaker](https://en.wikipedia.org/w/index.php?title=Shakers&oldid=1374078367)-style flat broom, which relies on a specialized vise and linear stitching rows to create a flat sweeping profile, the Besom is an older, structurally simpler, but mechanically robust sweeping tool. It is characterized by a 360-degree radial distribution of fibers around a central handle.
Here is the step-by-step critical path for constructing a traditional Besom for decorative, theatrical, or functional use.
**1. [Material and Tool Procurement](https://www.broomsquires.com/product-category/the-mercantile/companion-wares/)**
To achieve the authentic "witchy" aesthetic, synthetic materials should be avoided.
**Materials:**
**The Handle (Stale):** A foraged, un-milled branch 36" to 48" long. Traditionally, Ash, Hazel, or Chestnut are used. The wood should be relatively straight but can feature natural crooks and bark for character. It should be roughly 1" to 1.5" in diameter.
**The Brush (Fibers):**
*Traditional/Historical:* Fine Birch twigs (harvested in dormant winter months so they are tough and leafless), Heather, or Scotch Broom.
*Alternative:* Standard Broomcorn (*Sorghum bicolor*), utilizing only the longest "hurl" grades.
**Binding Material:**
*Historical:* Soaked willow withies (thin, flexible branches), bramble, or split oak.
*Modern/Durable:* 18-gauge to 20-gauge galvanized, copper, or blackened annealed wire, covered later with heavily waxed linen twine or leather cord.
**Tools:**
A sharp carving knife (Sloyd or drawknife).
A large soaking tub or trough (PVC pipe with end caps works well for long handles and twigs).
Heavy-duty wire cutters and pliers.
Heavy-duty pruning shears (for trimming twigs/stalks).
A fixed point to anchor your binding wire/twine (acting as a manual tensioner).
**2. Phase 1: Preparation & Hydration**
Adhering to the **Hydration Imperative**, organic fibers must be pliable to achieve maximum radial tension without snapping.
**Soak the Fibers:** Submerge the birch twigs, heather, or broomcorn in warm water.
*Broomcorn:* 15–20 minutes.
*Birch/Woody Twigs:* 12–24 hours to ensure the woody cellulose is sufficiently pliable.
**Prepare the Handle:** Using the carving knife, strip the bark off the bottom 6 to 8 inches of the handle (where the bristles will attach). Carve this section into a slight taper or carve a few shallow, horizontal grooves into the wood. This provides a "bite" for the wire/binding and prevents the brush matrix from sliding off the handle over time.
**Optional Anchor Hole:** For absolute structural integrity, drill a 1/4" transverse hole horizontally through the handle, about 3 inches up from the bottom tip.
**3. Phase 2: The Core Application (The "Teasing" Phase)**
The besom is built in layers, starting from the center and working outward.
**Anchor the Wire:** Thread your 18-gauge wire through the drilled anchor hole (if using) and twist it tightly against the wood. If not using a hole, wrap the wire around a carved groove 3-4 times and twist it onto itself using pliers to lock it.
*Note:* The spool of wire should be anchored to a wall hook or heavy table so you can pull the handle against it, using your body weight to maintain high, constant tension.
**Apply the Core:** Take small handfuls of your thickest, least attractive brush material (the core mass). Lay them flush against the tapered bottom of the handle.
**The Initial Wrap:** Roll the handle tightly, pulling against the anchored wire, wrapping the wire around the core fibers 2-3 times. Pull as tightly as possible; the wire must bite deeply into the wet stalks/twigs.
**4. Phase 3: The Radial Wrap (The 360-Degree Application)**
This is where the Besom gains its iconic round shape, entirely bypassing the shoulder-separation of flat brooms.
**Layering the Outer Brush (Hurl):** Take your premium, longest fibers (the visual exterior of the broom).
**Even Distribution:** Instead of applying them to the "front" and "back" like a flat broom, feed the fibers continuously around the handle in a complete 360-degree circle, covering the core completely. The top edges of the stalks/twigs should extend slightly above your wire binding line.
**Tension Winding:** Once the circumference is evenly covered (aiming for roughly 1.5 to 2 lbs of total fiber mass for a robust look), rotate the broom handle against the anchored wire.
**Creating the Collar:** Wrap the wire in a tight, descending spiral for about 2 to 3 inches. Each wrap should sit flush against the previous one. Maintain extreme tension—if the tension slacks, the inner core will slip.
**5. Phase 4: Ligation and Securing**
**Tying Off:** Once the 2-3 inch wire collar is established, cut the wire from the anchor (leaving a 4-inch tail). Using pliers, twist the tail tightly under the previous wire wrap and bury the sharp end deep into the center wooden handle so it cannot snag hands or clothing.
**Concealing the Wire (Embellishment):** The structural wire can be visually jarring for authentic decor. Take your soaked willow withies, leather strips, or heavy waxed twine, and wrap them tightly over the wire collar to conceal it. Tie this off with a secure hidden knot or a decorative plait.
**Top Trimming:** Using pruning shears, cleanly snip away the ragged tops of the stalks/twigs that protrude *above* your wire/twine collar. Cut them at a slight bevel pointing away from the handle for a clean, finished look.
**6. Phase 5: Desiccation (Curing) and Bottom Trimming**
**The Shrinkage Lock:** The finished Besom must be placed in a dry, well-ventilated area (or drying kiln) for 48 to 72 hours. As the woody twigs or broomcorn desiccates, the cellular structure shrinks. Because the wire was applied under extreme tension while the fibers were swollen with water, this drying process creates a permanent, immovable mechanical lock against the handle.
**Leaving the Tail Rustic:** *Do not* guillotine or shear the sweeping end of the broom flat. The hallmark of the Besom is its ragged, natural, tapering tail. Leave the bottom edge wild and untrimmed.